پیوند به سایت های مهم ایران
سایت مقام معظم رهبری
سایت ریاست جمهوری
انجمن پلیمر ایران
انجمن علمی کامپوزیت ایران
مرکز هم اندیشی دانشگاهی
   
 
Associate Professor
 Dr. Morteza Ehsani
 

 
Tel.: +98-21 4458 0045
Fax: +98-21 44580022
Mobile: +98-912 2003299
E-mails:
m.ehsani@ippi.ac.ir
mortezaehsani2002@yahoo.com
 
1. Personal Details
 
  • Name & Surname:  Morteza Ehsani
  • Date and place of birth:  03/02/1972, Noor, Iran
  • Marital status: Married
  • Nationality: Iranian
  • Language: English (writing, reading, speaking)
 
 
2. Educational Qualification
 
  • B.Sc. (Chemical Engineering), University of Science & Technology of Iran, Tehran (1989-94). Thesis: “Design and Simulation of Fluidized Bed Reactor”.
  •  M.Sc. (Chemical Engineering), University of Science & Technology of Mazandaran, Iran (1994-97). Thesis: “Preparation and Synthesis of Urethane Alkyd Resin for Using in Industrial Coatings”.
  • Ph.D. (Polymer Engineering), Polymer and Petrochemical Institute, Tehran (1998-2004). Thesis: “Multi-Component Polymeric Alloys as Outdoor High Voltage Insulators“.
  • Research visitor Collaboration with Professor H. Borsi and Professor E. Gockenbach, Schering Institute, Leibniz University, Hannover, Germany (2003-2004).
 
 
3. Teaching Experience:
  • Physical chemistry of Polymers
  • Polymeric Resins (Epoxy, Polyester, Polyurethanes…)
  • Surface coatings (Resin & Paint )
  • Polymer technology
  • Elastomers
 
4. Research Interests:
  • Nano technology and nano composites
  • Polymeric Electrical Insulation
  • Modification of Polymeric Reins
  • Surface coatings  (Resins and Paints)
  • Powder coatings
  • Polymeric Alloys
  • Synthesis of  Resins
 
5. Employment
·         Iran Polymer and Petrochemical Institute (IPPI), 2010-present, Chief of Polymer Processing Faculty
·         Iran Polymer and Petrochemical Institute (IPPI), 2009-present, Associate Professor of Polymer Engineering
·         Iran Polymer and Petrochemical Institute (IPPI), 2004-2009, Assistant professor of polymer engineering
·         Iran Polymer and Petrochemical Institute (IPPI), 2008-2010, Deputy of Financial and Administration
·         Iran Polymer and Petrochemical Institute (IPPI), 2006-2008, Chief of Polymer technology Incubator
·         PEKA Chemi, Tehran, 2004-2006, Vice President and Technical Consultant
·         Schering Institute, University of Hannover, Germany, 2003-2004, Research visitor Collaboration with Professor H. Borsi and Professor E.Gockenbach
·         Tarbiat Moalem University, Tehran, 2004, Lecturer in “Polymer Chemistry and Technology”
·        Azad University of Shahre-Ray, Tehran, 1999-2003, Lecturer in “ Polymer Chemistry and Technology”
·         Hawilux Paint & Resin CO. Tehran, 1998-2003, R & D Deputy Managing Director
·         Hawilux Paint & Resin CO. Tehran, 1998-2003, Powder Coating Manager
·         Pars Pamchal CO, Tehran, 1994-98, Senior Chemist
·         South Korea, June-July, 1999, Training in Hyundai CO
·         Milano, Italy, May, 2002, Training in O.M.C. Co
·         South Korea, January, 2003, Training in Hyundai CO
 
6. HONOURS AND AWARDS
·         2011, selected as An excellent Lecturer of 26th International power system conference, (PSC2011), Tehran, Iran.
·        2009, selected as the Distinguished Researcher (academic staff) of Iran polymer and petrochemical institute.
 
7. OTHER PROFESSIONAL ACTIVITIES
A) REVIEWS
·         Journal of European Transactions on Electrical Power, Published by John Wiley.
·         International Journal of the Physical Sciences (English) Published by Academic Journals
·         European Polymer Journal (English), Published by Elsevier Science Ltd
·         Journal of Applied Polymer Science (English), Published by John Wiley.
·         Applied Composite Materials (English), Published by Springer.
·         Iranian Polymer Journal (English), Published by Springer.
·         Iranian Journal of Polymer Science &Technology (Persian), Published by the Iran Polymer Institute
·         Progress in Color, Colorants and Coatings (English), Published by Science and Color Technology institute.
·         Journal of Color Science and Technology (Persian), Published by Science and Color Technology institute.
·         Iran National Science Foundation
·         4th International color and coating congress (English), Amir kabir University, Tehran.
·         27th International power system conference, PSC 2012, Tehran, Iran
·         26th International power system conference, PSC 2011, Tehran, Iran
·         25th International power system conference, PSC 2010, Tehran, Iran
·         24th International power system conference, PSC 2009, Tehran, Iran
·         23th International power system conference, PSC 2008, Tehran, Iran
·         22th International power system conference, PSC 2007, Tehran, Iran
·         21th International power system conference, PSC 2006, Tehran, Iran
·         20th International power system conference, PSC 2005, Tehran, Iran
·         9th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran
·         8th International Seminar on Polymer Science and Technology, ISPST 2005, Tehran, Iran
·         Polymer Compounds, Composites & Foams, ISPST 2005, Tehran, Iran
 
B) SCIENTIFIC SOCIETY and JOURNAL MEMBER
  • Iran Polymer Society
  • Iranian National Electro-technical Committee (INEC)
  • Iranian Insulators Technical Committee
  • Progress in Color, Colorants and Coatings  (English) (Member of Organizing Committee &Board)
  • Journal of Color Science and Technology (Persian) (Member of Organizing Committee &Board).
  • Journal of Basparesh (Persian) (Member of Organizing Committee &Board).
 
 
8. Patent
  •   German Patent , DE 10 2004 010 278 A1
M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian, G.R. Bakhshandeh; “Flexible Outdoor Insulator with Good Electrical, Mechanical and Aging Characteristics”; 2005.
  •    Iran Patent, NO: 30564
M. Ehsani, J. Morshedian, G.R. Bakhshandeh; "Production of Polymeric Insulation for Use as Transmission & Distribution of Power"; 2005.
  •   Iran Patent, NO: 42681
M. Ehsani, Y. Jahani, "A New method for Improvement of Rheological Properties of PP-Talc Composites"; 2007.
  • Iran Patent, NO:42608
M. Ehsani, Y. Jahani, "Recycling of Powder Coatings"; 2007.
  • Iran Patent, NO:42679
M. Ehsani, Y. Jahani, "A New Additive for Thermal Satiability of PP-Talc Composites"; 2007.
  • Iran Patent, NO:40364
M. Ehsani, M.Abtahi, GR. Bakhshandeh, "A New Processing Aid for Rubber Compounding"; 2007
  • Iran Patent, NO: 45650
F. Farhang, M. Ehsani, S. H. Jazayeri, “Production of silicone coatings for using on porcelain insulators”; 2008.
  • Iran Patent, NO:40365
M. Ehsani, M. Abtahi, G.R. Bakhshandeh, "The Usage of Powder Coating Waste as Filler in Rubber Compounds"; 2008.
  • Iran Patent, NO:66052
M. Ehsani, M. Haghnegahdar, G.R. Bakhshandeh, G. Naderi, “Preparation of elastomer styrene butadiene/ powder color waste composite”; 2011
  • Iran Patent, NO:65110
M. Ehsani, M. J. Azizi, G. Naderi, GR. Bakhshandeh, “Production of a blend based on butyl/chloroprene rubber”; 2011
  • Iran Patent, NO:69413
M. Ehsani, et al. “Preparation of the resin paste dressing plant for periodental surgeries”; 2011.
  • Iran Patent, NO: 74448
M. Ehsani, Farhadinejad, Z., Mommen-Bellah, S., Alavi, S.M.B. (2012):   Design of a formulation based on nano particles for application in dry transformers,
 
 
 
 
 
 
9. Book
  1. M. Ehsani, J. Morshedian, G.R. Bakhshandeh, “New Polymeric Alloys as High Voltage Insulators”, (English), ISBN: 978-3-8433-9250-1, Lambert Academic Publisher (Lap), 2011.
  2. M. Ehsani, J. Morshedian, G.R. Bakhshandeh, "Polymeric Electrical Insulators", ISBN: 978-600-90570-3-0, (In Persian), Iran Polymer and Petrochemical Institute Publisher, 2010.
  3. M. Ehsani, "Translation of Failures and Analyses on Powder Coatings", ISBN: 978-600-90570-2-3, (In Persian), Iran Polymer and Petrochemical Institute Publisher, 2008.
  4. M.Barikani, M.Ehsani, “Chemistry and Technology of Polyurethane”, (In Persian), Published by:Ava matn, Tehran, 2008.
  5. M. Ehsani, M. Almassi, “Powder Coatings, Chemistry, and     Technology”, (In Persian), ISBN: 964-7751-61-3, Talaeih Publisher. 2005.
 
 
10. Journal Papers
 
1-      M. Ehsani, H.A. Khonakdar, A. Ghadami, “Assessment of morphological, thermal and viscoelastic properties of epoxy vinyl ester coating composites: role of glass flake and mixing method” Progress in Organic Coatings, 76,238-243, 2013.
2-      Z. Farhadinejad, M. Ehsani, S. Momenbellah, "Dynamic mechanical and thermal behavior evaluation of an epoxy/anhydride/nano Al2O3 composite system”, High Performance Polymers, Accepted, In Press
3-      A. Omrani, A. Rostami, A.Ravari, M. Ehsani, “The relationship between composition and electrical properties of brass covered by a nanocomposite coating of glycerol diglycidyl ether: An EIS and DMTA study”, Progress in Organic Coatings, Accepted, In Press (Available online 21 November 2012).
4-      H. A. Khonakdar, M.Ehsani, "Nanofilled Polypropylene/Poly (trimethylene terephthalate)Blends:AMorphological and Mechanical Properties Study” , Journal of. Macromolecular Science: Part B: Physics. Accepted, In Press.
5-      M. Ghaffari, M. Ehsani, H. A. Khonakdar, G. V. Assche, H. Terryn, "The kinetic analysis of isothermal curing reaction of an epoxy resin-glassflake nanocomposite", Thermochimica Acta, Vol. 549,  pp. 81-86, 2012
6-      Z. Farhadinejad, M. Ehsani, S. Momenbellah, M. M. Saei-Shirazi, S. M. B. Alavi and H. Borsi, “An Investigation of Thermal, Physical and Electrical Properties and Morphological Behavior on Nano Epoxy Composite Insulation”, IEEE Transaction on nanotechnology, Vol. 11, Issue: 5
pp. 957 – 963, 2012.
7-      Z. Farhadinejad , M. Ehsani, I. Ahmadi-Joneidi, A.A. Shayegani-Akmal, H. Mohseni, “An Investigation of the Effect of UVC Radiation on Thermal, Electrical Properties and morphological behavior of Silicone Rubber Insulators”, IEEE Transaction on dielectric and electrical insulations, Vol. 19, Issue 5, pp. 1740-1749, October 2012.
8-      Z. Farhadinejad, M. Ehsani, B. Khosravian, G. Ebrahimi, “Study of thermal properties of wood plastic composite reinforced with cellulose micro fibril and nano inorganic fiber filler”, European Journal of Wood and Wood Products, November 2012, Volume 70, Issue 6, pp 823-828.
9-       Z. Soltani, F. Ziaei, M. Gaffari, H. Afarideh, M. Ehsani, “Mechanical and Thermal Properties & Morphological Studies of 10 MeV Electron Beam Irradiated LDPE/Hydroxyapatite Nano-Composite”, Radiation Physics and Chemistry, Accepted, In Press.
10-  Farhadinejad, Z., Ehsani, M., Khosravian, B., Ebrahimi, G.: Investigation of epoxy-polyester resin resulting from waste powder coating on the physical and mechanical properties of wood poly (propylene) composite: Journal of Color Science and Technology (In Persian), Accepted, In Press, Available online July 2012.
11-  M. Ghaffari, M. Ehsani, H. A. Khonakdar, “Effect of surface chemical treatment on carbon steel/epoxy coating Delamination”, Journal of Advanced Materials and novel coatings, Vol. 1, pp.35-40, (2012).
12-  F. Ravari, A. omrani, A. A. Rostami, M. Ehsani, “Ageing effects on electrical, morphology, and mechanical properties of a low viscous epoxy nanocomposite”, Polymer Degradation and Stability, 97, 929-935, 2012.
13-  M. Ghaffari, M. Ehsani, H. A. Khonakdar, G. V. Assche, H. Terryn, “Evaluation of curing kinetic parameters of an Epoxy/ Polyaminoamide/Nano-glassflake system by non-isothermal differential scanning Calorimetry”, Thermochimica Acta, 533, 10-15,2012.
14-  M. Ehsani, Z. Farhadinejad, D. Ronasi, “Calculation of molecural weight and epoxy equivalent weight by proton nuclear magnetic resonance spectroscopy”, Bashparesh, 2, 16-21, 2012.
15-  M. Mousaei, M.A. Faghihi Sani, S. Baghshahi, M. Ehsani, “Hydrothermal synthesis of CoAl2O4 blue nano-pigment”, Journal of Color Science and Thechnology (In Persian), Accepted, In Press, Available online July 2012.
16-  Allahverdi, M. Ehsani, H. Janpour, “The Effect of Nanosilica on Mechanical, Thermal and Morphological Properties of Epoxy Coating”, Progress in Organic Coatings, 75, pp.543-548, 2012
17-  M. Mohammadi, A. Yousefi, M. Ehsani, “Thermorheological analysis of blend of high- and low-density polyethylenes”, Journal of Polymer Research, 2012,19, 9798-9809.
18-  M. Mohammadi, A. Yousefi, M. Ehsani, “Study of the thermal and mechanical properties of blown films of high- and low- density polyethylene blends”, Journal of Applied Polymer Science, 2012, 125, 755-767.
19-  S. R. Mohammadi, H. A. Khonakdar, M. Ehsani, S. H. Jafari, U. Wagenknecht, B. Kretzschmar, “Investigation of Thermal Behavior and Decomposition Kinetic of PET/PEN Blends and their clay containing nanocomposites”, Journal of Polymer Research, 18: 1765-1775, 2011
20-  M.A. Shamekhi, S.H. Jafari, H.A. Khonakdar, M. Ehsani, “Preparation and characterization of UV irradiation cross-linked LDPE/EVA blends”, Plastic, Rubber and Composites, 39: 109-110, 2010
21-  M. Ehsani. Y. Jahani, "An Investigation of Powder Coating Waste Effect on Morphological and Mechanical Properties of PP-Talc Composites", Journal of Color Science and Technology (Persian), 3: 223-232, 2010
22-  H.A. Khonakdar, H. Jafari,, M. Ehsani, A. Asadinejad, “Assessment of Melt Rheological Behavior of PTT/PE and PTT/PA 12 Blends by Emulsion and Micromechanical Models”, Iranian Polymer and Technology Journal (Persian), 5: 399-405, 2010
23-  M. Ehsani, A. A. Yousefi, S. Samiei Yeganeh, “Study of Rheological behaviors of Electrostatic Thermoset Powder Coatings”, E-Polymer, No.140, 2009
24-  Y. Jahani, M. Ehsani, "The effects of Epoxy Resin Nano Particles on Shrinkage Behavior and Thermal Stability of Talc-Filled Polypropylene", Polymer Bulletin, 63: 743-754, 2009
25-  M.Ehsani, M. Badripour, M. H. R. Ghoreishy, "Study and Evaluation of EPDM Increasing in NR/BR Compounds by Reactive Processing”, Iranian Polymer and Technology Journal (Persian), 18: 149-157, 2009
26-  F. Farhang, M.Ehsani, S. H. Jazayeri, “Effects of the Filler Type and Quantity on the Flashover Voltage and Hydrophobicity of RTV Silicone Rubber Coatings”, Iranian Polymer Journal, 18: 149-157, 2009
27-  Y. Jahani, M. Ehsani, “The rheological modification of talc-filled polypropylene by epoxy-polyester hybrid resin and its effect on morphology, crystallinity, and mechanical properties”, Polymer Engineering & Science, 49: 619-629, 2009.
28-  M. Ehsani, M. Abtahi, M.E. Zeynali, A.A. Harati, "LDPE/EPDM Blends with Unique Surface, Electrical and Mechanical Properties for Electrical Insulators", Iranian Polymer Journal, 18: 37-47, 2009.
29-  S. H Jazayeri, M. Ehsani, F. Farhang, "Study of Silicone Rubber Coatings (RTV) Role on Improvement of the Ceramic Insulators Behavior in Contaminated Areas”, Journal of Color Science and Technology, 2: 9-22, 2008.
30-  M. Ehsani, M. Barikani, T.S. Porkar, "Synthesis and Application of Silicone-Alkyds in Stoving Paint and Zinc-Rich Primers". Journal of Color Science and Technology. 2:123-128, 2008.
31-  M. Razavi-Nouri, J. Morshedian, M. Ehsani, F. Faghihi, “Mechanical Properties & Morphology of Low Density Polyethylene/Polydimethylsiloxane Immisible Blends: Modeling & Influence of Curing Agent”, E-Polymers, 14: 1-14, 2008.
32-  F. Faghihi, J. Morshedian, M. Razavi-Nouri, M. Ehsani, "Dynamic Rheological and Mechanical Behaviours of Poly (Dimethylsiloxane)/Low Density Polyethylene Immisible Blends: Interfacial Modification via Reactive Blending", Iranian Polymer Journal, 17: 755-765, 2008.
33-  M. Ehsani, G.R. Bakhshandeh, J. Morshedian H. Borsi, E. Gockenbach; “The Dielectric Behavior of Outdoor High Voltage Polymeric Insulation Due to Environmental Aging”, Journal of European Transactions on Electrical Power, 17: 47-59, 2007
34-  M. Ehsani, A. Harati, "Introduction to Powder Coating II”, Industry Journal Paint And Resin, 831-23, 2006
35-  M. Ehsani, G.R. Bakhshandeh, F. Kavosi, "Application and Properties of Modified Asphalt with Scrap Tyres", Iranian Rubber Magazine Special Issue, Recycling of Rubber, 11(42): 94-100, 2006.
36-  M. Ehsani, A. Harati, "Introduction to Powder Coating I”, Industry Journal Paint and Resin”, 8(26): 20-23, 2006.
37-  M. Ehsani, H. Borsi, E. Gockenbach, G.R. Bakhshandeh J. Morshedian; “Modified Silicone Rubber for Use as High Voltage Outdoor Insulators”, Journal of Advances in Polymer Technology, 24 (1): 51-61, 2005.
38-  M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian, G.R. Bakhshandeh; “An Investigation of Dynamic Mechanical, Thermal, and Electrical Properties of housing materials for outdoor Polymeric Insulators”, European Polymer Journal, 40(11): 2495-2503, 2004.
39-  M. Ehsani, M. Barikani; Properties of Silicone Modified Alkyd Resin, Journal of Baspar, 3(3): 32, 2001.
 
 
 
11. International and National Conferences
 
 
 
1)   Mehdi Gaffari, Morteza Ehsani, Hossein Ali Khonakdar, Peyman Taheri, Herman Terryn,  « Investigation of the effect of chemical surface treatments on interfacial properties of Epoxy-carbon steel”, ISPST2012,Amirkabir University of Technology, Tehran, Iran, 21-25 October 2012.
2)   Mehdi Gaffari, Morteza Ehsani, Hossein Ali Khonakdar, « Investigation of morphology and rheological  properties of glass flake/epoxy nanocomposites systems”, ISPST2012,Amirkabir University of Technology, Tehran, Iran, 21-25 October 2012.
3)   Z.farhadinejad, M.Ehsani, S. Moemen bellah, S.M. B. Alavi, M. M. Saei-shirazi and H. Borsi, “An investigation of the effect o fnano alumina on the electrical and thermal properties and morphological behavior of the cast epoxy nano composite” XVII International Symposium on High Voltage Engineering, Hannover, Germany, August 22-26, 2011
4)   M. Bayani, M. Ehsani, A. Mehdikhani, “The effect of ultraviolet (UV) radiation and humidity stress on silicone rubber insulator behavior”, XVII International Symposium on High Voltage Engineering, Hannover, Germany, August 22-26, 2011
5)   Z. farhadinejad, M. Ehsani, S. Momen bellah, S. M. B. Alavi, “Study of the effect of nano alumina on electrical and mechanical properties of cast epoxy composite” Proceedings of the Polymer Processing Society Asia/Australia Regional Meeting,  PPS-2011,  Kish Island (Iran), November 15-17, 2011
6)   M.Ehsani, Z.farhadinejad, S. Moemen-bellah, S. M. B. Alavi, M. M. Saei Shirazi, H. Borsi, “Electrical, dynamic-mechanical, thermal and morphological behaviors of epoxy-nano alumina systems” 26th International power system conference, PSC 2011, Tehran, Iran, 30 October-2 November 2011
7)   M. Bayani, M. Ehsani, A. Mehdikhani, “Investigation of silicone insulators’ behaviour under ultraviolet (UV) radiation and humidity stress”, 26th International power system conference, PSC 2011, Tehran, Iran, 30 October-2 November 2011
8)   M.K. Moghadam, M. Keramati, H. Beirami and M. Ehsani, “Investifation on aging in different parts of an silicon insulator”, XVII International Symposium on High Voltage Engineering, Hannover, Germany, August 22-26, 2011
9)   M.K. Moghadam, M. Keramati, I. Motamedi, H. Beirami and M. Ehsani, evaluation of aging in different parts of silicone insulator, 26th International power system conference, PSC 2011, Tehran, Iran, 30 October-2 November 2011
10)   M. Mousaei, M.A.Faghihi-Sani, S. Baghshahi, M. Ehsani, “Synthesis of blue pigment of nano alumina cobalt by hydrothermal method” 8th Iranian conference of ceramic, Tehran, Iran, 3-4 May, 2011
11)   H.R. Ebrahimi Jahromi, G. R. Bakhshandeh, M. Ehsani, G. Naderi, A. Alipour, “Preparation and properties of nanoclay and powder coating waste in NBR compounds”, International Congress on Nanoscience an Nanotechnology, ICNN, Shiraz, Iran, 9-11 November 2010
12)   H.R. Ebrahimi Jahromi, G. R. Bakhshandeh, M. Ehsani, G. Naderi, “investigation of mechanical and rheological properties of nanocomposites based on NBR/nanoclay”, 8th Nanothechnology Iranian Student Conference, NaN, Mashhad, Iran, 1-2 December, 2010
13)   H.R. Ebrahimi Jahromi, G. R. Bakhshandeh, M. Ehsani, G. Naderi, A. Alipour, “Effect of two types of filler on cure characteristic and mechanical properties of NBR rubber compound”, 10th Iran Rubber Industries Conference & Expo, Tehran, Iran, 2010.
14)   B. Kaffashi, H. Haddadi, M. Ehsani, A. Ghadami, “The effect of modified glass flakes on rheological properties of glass flake-epoxy vinyl ester composites”, 13th Iranian National Chemical Engineering Congress and 1st International Regional Chemical and Petroleum Engineering, Kermanshah, Iran, 25-28 October, 2010
15)   B. Kaffashi , M. Ehsani, H. Haddadi, “The effect of mixing procedure on rheological properties of glass flake-epoxy vinyl ester Composites” The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA- 2), Kish Island, Iran, Dec. 27-30, 2010
16)   M. Ehsani, F. Farhang, Investigation of discharge voltage of porcelain insulators with different RTV silicone coatings in polluted environment”, 25th International power system conference, PSC 2010, Tehran, Iran, 2010
17)   S. Zoghi, G. Bakhshandeh, G. Naderi, M. Ehsani, S. Shokoohi, “Polymer nanocomposites based on butadiene rubber/ powder coating waste/ nanoclay”, International Congress on Nanoscience and Nanotechnology Shiraz, Iran, 9-11 November, 2010.
18)   S. Zoghi, G. Bakhshandeh, G. Naderi, M. Ehsani, S. Shokoohi, “Polymer Nanocomposites Based on Butadiene Rubber/Powder coating waste/nanoclay”, ASPM 2010, 8-10 Austria, 2010.  
19)   S. Zoghi, G. Bakhshandeh, G. Naderi, M. Ehsani, “Improvement of mechanical properties and morphology of BR elastomer by Nanoclay and waste paint powder”, 10th Iran Rubber Industries Conference & Expo, Tehran, Iran, 2010.
20)   M. .Mohammadi, A. A. Yousefi, M. Ehsani, "Differential Scanning Calorimetric Investigation of Polyethylene Blends", 9th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran, October 2009.
21)   B.Shirkvand, M. Ehsani, A.Rabbii "Synthesis of Naphthalene Sulfonate Formaldehyde Condensate as in Dispersing Agent", 9th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran, October 2009.
22)   M. Ghafari, M. Ehsani, A. Ghadami, H.A.Khonakdar "Epoxy/Glass Flake Composite: Curing Kinetics, Glass Transition Temperature and degradation Temprature", 9th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran, October 2009.
23)   M. Ehsani, Y. Jahani, M. Gafari, "The Effect of Epoxy-Polyester on Rheology, Morphology and Mechanical Properties of Talc-Reinforced Polypropylene". European Polymer Congers, EPF 2009, Graz, Austria., 2009
24)   S. H. Jazayeri, M. Ehsani, F. Farhang, " Improvement of Porcelain Insulators Behavior Under Wet & Polluted Conditions", The 2nd International Conference on Ceramics (Global Roadmap for Ceramics-ICC2) Proceedings, Verona, Italia, (29-4) Jun- July, 2008
25)   M. Badripour, M. Ehsani, M.; Ghoreishy, M.H.R."Effect of pre-cured EPDM in NRBR blend properties for tire sidewall", 9th Iranian National Rubber Conference, Kish, Iran, 2008.
26)   M. Abtahi,  M. E. Zeynali, M. Ehsani, A. A. Harati, T. Darestani, "LDPE/EPDM Blends with Unique Surface, Electrical & Mechanical Properties for Electrical Insulator", The 5th International Chemical Engineering Congress & Exhibition, Kish, Iran, 2008.
27)   M. Ehsani, G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Erosion and Tracking Characterization of Outdoor Composite Insulators”, 15th International Symposium on High Voltage Engineering (ISH, Ljubljana, Slovenia), August 27-31, 2007..
28)   M. Ehsani, M.Abtahi, A.Harati, “Study of Electrical, Surface and Mechanical Properties of EPDM-LDPE Blends for Use as Outdoor Electrical Insulators”, 15th International Symposium on High Voltage Engineering (ISH), Ljubljana, Slovenia, August 27-31, 2007..
29)   Y. Jahani, M. Ehsani, "Modification of PP-Talc Composite by Reactive Mixing With Hybrid Epoxy-Polyester Resin", IUPAC-2006, South Africa, Syellenbusch, 2006.
30)   M. Ehsani, M. Karabi, S. Soltani, “Application of Stress Relaxation Behavior for Evaluation of Processability of Raw Rubbers”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, , Yamagata, Japan July 2-6, 2006.
31)   M. Abtahi, M. Ehsani, T. Darestani Farahani, “Powder Coating Waste as New Filler for Rubber Compound”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.
32)  M. Karrabi, M. Ehsani, S. Soltani, “Curing Characterization of Styrene-butadiene-rubber compound using RPA”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.
33)   M. Abtahi, M.E. Zeynali, M. Ehsani, A.A. Harati, “Study of Electrical, Rheological and Mechanical Properties of LDPE/EPDM Blends for Use as Electrical Insulators”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.
34)   H. Baharvand, M. Ehsani, “Mechanical, Thermal and Rheological Behavior of Styrene-Butadiene Rubber Filled with Nano Organoclay as Filler”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.
35)   Y. Jahani, M. Ehsani, “Effects of Powder Coating Waste on Mechanical, Rheological, and Thermal Properties of Talc Filled PP”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Japan, July 2-6, 2006, Yamagata.
36)   M. Ehsani,  G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Surface Degradation of Outdoor Polymeric Insulators Resulting from Electrical and Environmental Stress”, 20th International Power System Conference (PSC 2005, Tehran, Iran), November 14-16, 2005.
37)   M. Ehsani, M. Abtahi, M. E. Zeynali, A.A. Harati, “Effect of EPDM on the Mechanical, Thermal, and Dynamical Mechanical Properties of Blends LDPE”. International Seminar on Polymer Science and Technology (ISPST 2005, Tehran, Iran), September27-29, 2005.
38)   M. E. Zeynali, M. Abtahi, M. Ehsani, A.A. Harati, “Synthesis of partially hydrolyzed polyacrylamide & investigation of solution properties (viscosity behavior)”. International Seminar on Polymer Science and Technology (ISPST 2005, Tehran, Iran.
39)   M. Ehsani,  G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Study of Electrical, Mechanical and Surface Properties of Composite Insulators”, 14th International Symposium on High Voltage Engineering (ISH), Beijing, China, August 25-29, 2005.
40)   M. Ehsani, G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Effect of LDPE on the Mechanical, Electrical and Dynamical Mechanical Properties of Blends of EPDM-Silicone Rubbers”, Polymer Processing Society (PPS-2005) America’s Regional Meeting, Quebec, Canada August 14-17, 2005.
41)   M. Ehsani, H. Borsi, E. Gockenbach,  G.R. Bakhshandeh, J. Morshedian, “Improvement of Tracking and Erosion Behavior of Outdoor Insulation with a new Polymeric Alloy”, Grenzflächen in Elektrischen Isoliersystemen, Beanspruchungen, Design, prǘfverfahren, Lebensdauer, Hanau, Germany, 8-9 March 2005..
42)   M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian G.R. Bakhshandeh, “Improvement of Tracking and Erosion Behavior of Outdoor Insulation with a new Polymeric Alloy”,  IEEE International Symposium on Electrical Insulation, Indiana, USA, 19-22 September 2004.
43)   M. Ehsani, H. Borsi, E. Gockenbach,  G.R. Bakhshandeh, J. Morshedian “Improvement of Electrical, Mechanical and Surface Properties of Silicone Insulators”, IEEE Conference on Electrical Insulation and Dielectric Phenomena, Boulder, Colorado, USA, 17-20 October, 2004.
44)   M. Ehsani, H. Borsi, E. Gockenbach, G.R. Bakhshandeh, J. Morshedian, N. Abedi.; “study of Electrical, Dynamical and Mechanical and Surface Properties of Silicone-EPDM Blends”, 8th  IEEE International Conferences on Solid Dielectrics, Toulouse, France, July 5-9, 2004.
45)   M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian, G.R. Bakhshandeh, A. A.  Shayegani, “Effect of Aging on Dielectric Behavior of Outdoor Polymeric Insulators”, 8th IEEE International Conferences on Solid Dielectrics, Toulouse, France, July 5-9, 2004.
46)   M. Ehsani, M. Barikani, “Properties of Urethane Alkyd Polymers”, International Symposium on Polymer Science & TechnologyTehran, Iran, 3-5 November, 1997.
 
 
Last Updated : 2021/01/06
  
     
 

نام و نام خانوادگی :
ایمیل :
* متن کامنت :