(Ph.D., M.Sc., B.Sc.)

Associate Professor of Polymer Engineering                                                              

Iran Polymer and Petrochemical Institute

(Biomaterials Department)

Head of polymer science faculty

Tel: 44580026        Fax: 44196583

 

PO Box 14965/115, Tehran, Iran

 

A. Research Interests:

 

Hollow fiber and Flat sheet membranes manufacturing

Membranes in biomaterials and Tissue engineering

Polymers in drug delivery systems

Hemodialysis, RO,Ultra, Micro and Nano filtration

Thermodynamic of polymer solutions and Phase inversion studies 

Membranes cleaning

 

B. Teaching Experience:

 

Membrane separation and biomaterials

Polymer surface modification and biocompatibility in nano scale

Polymer technology , chemistry

 Publications

 

 

C. Journal Papers: 

 

 

1) Jalal Barzin., S. S. Madaeni and H.Mirzadeh., M. Mehrabzadeh., Effect of poly vinyl pyrrolidone on morphology and performance of hemodialyssis membranes prepared from polyether sulfone, Journal of applied polymer science, (2004), 3804-3813

 

2) Barzin J., Feng C., Khulbe K.C., Matsuura T., Madaeni S. S., Mirzadeh H., Characterization of polyether sulfone hemodialysis membrane by ultrafiltration and atomic force microscopy, Journal of Membrane science, (2004), 77-85

 

3) ) Barzin J., Madaeni S. S., Mirzadeh H., Effect of Preparation Conditions on Morphology and Performance of Hemodialysis Membranes Prepared from Polyether Sulfone (PES) and Polyvinylpyrrolidone (PVP), Iranian polymer Journal, (2005), 353-360

 

4) Madaeni S.S., Rahimpour A. and Barzin J., Preparation of Polysulfone Ultrafiltration Membranes for Milk Concentration: Effect of Additives on Morphology and Performance. Iranian Polymer Journal,( 2005), 421-428

 

5) Barzin J., Azizi H.  Morshedian J. Preparation of Silane-Grafted and MoistuCross-Linked Low Density Polyethylene: Part I: Factors Affecting Performance of Grafting and Cross-Linking. Polymer-Plastics Technology and Engineering, (2006), 979-983

 

6) Barzin J., Madaeni S.S. and Poormoghadasi S., Hemodialysis Membrane Prepared from Polyvinyl Alcohol: Effect of Preparation Conditions on Morphology and Performance. Journal of Applied Polymer Science, (2007) 2490-2497

 

7) Azizi H., Barzin J.  and Morshedian J., Silane crosslinking of polyethylene: the effects of EVA, ATH and Sb2O3 on properties of the production in continuous grafting of LDPE. eXPRESS Polymer Letters, (2007) 378-384

 

8) Barzin J., Azizi H.  Morshedian J., Preparation of Silane-Grafted and Moisture Crosslinked Low Density Polyethylene. Part II: Electrical, Thermal and Mechanical Properties, (2007) 305-310

 

9) Barzin J. Sadatnia B. Theoretical phase diagram calculation and membrane morphology evaluation for water/solvent/polyethersulfone systems. Polymer, (2007) 1620-1631

 

10) Madaeni S.S., Esmaeili M and Barzin J., Preparation and Optimasation of Polyethersulphone- Based Composite Mmembranes for Air Separation at Low Pressures. Polymers & Polymer Composites, (2007) 579-590

 

11) Zare.M, Mobedi.H, Barzin.J, Mivehchi.H, Jamshidi.A, Mashayekhi.R: Effect of Additives on Release Profile of Leuprolide Acetate in an In Situ Forming Controlled-Release  System: In Vitro Study. Journal of Applied Polymer Science, (2008) 3781-3787

 

12) Barzin J. and  Sadatnia B., Correlation between macrovoid formation and the ternary phase diagram for polyethersulfone membranes prepared from two nearly similar solvents., Journal of Membrane Science, (2008) 92-97

 

13) Astaneh R., Erfan M , Barzin J., Mobedi H and Moghimi HR, Effect of ethyl benzoate on performance, morphology and erosion of PLGA implants formed in situ. Advances in Polymer Technology, (2008) 17-26

 

14) Madaeni S.S., Barzin J and Jokar Z., Evaluation of the Morphology and Performance of Polyether Sulfone Reverse Osmosis Composite and Non-composite Membranes. Polymers & Polymer Composites, (2009) 101-108

 

15) Gholizadeh B., Arefazar A and Barzin J., Polycarbonate/ polyamide 6/ nanoclay ternary nanocomposite membranes: Preparation, characterization and gas separation properties. Polymers & Polymer Composites, (2009) 181-188

 

16) Madaeni S.S., Rafiee E.,Seyedzadeh Z and Barzin J. Effect of Dodeca_Tungstophosphric Acid on morphologh and performance of polyvinyl alcohol membrane for gas separation. Journal of Applied Polymer Science, (2009) 484-490

 

17) Esmaeili, M., Madaeni, S. S., Barzin, J., The dependence of morphology of solid polymer electrolyte membranes on transient salt type: effect of cation type”, Polymer  International, (2009) 1006-1013

 

18) Farrokhzad. H, Mobedi. H, Barzin. J and Poorkhalil. A , Evaluation of Polymer Concentration Effect on Doxycycline Hyclate Drug Release from in Situ Forming System based on Poly (lactide – co – glycolide). Iranian Jurnal of Polymer Siene and Technology,(2010) 495-505

 

19) Chaee. A, Shariaty – Niassar. M, Barzin. J, Matsuura. T, Effects of chitosan membrane morphology on coper ion adsorption, Chemical Engineering Journal(2010) 46-55

 

20) Sorush. A, Barzin J, Barikani. M, The Role of Polymeric Additives on the Morphology and Performance of a Porous Layer of Nanofiltration Composite Memranes Based on Polyether Sulfone. Iranian Jurnal of Polymer Siene and Technology, (2010) 213-222

 

21) Madaeni. S. S, Rafiee. E Seyedzadeh. Z, Barzin. J , Effect of Dodea – Tungstophosphoric Acid on Morphology and Performance of Polyethersulfone Membrane for Gaz Separation. Journal of polymer engineering, (2010) 109-133

 

22)  Majid Esmaelili, Sayed S Madaeni, Jalal Barzin, Morphological dependency of polymer electrolyte membranes on transient salt type: effets of anion species. Polymer  International, (2011) 362-370

 

23) Pazokian. H, Jelvani, S, Barzin. J, Mollabashi. M, Abolhosseini. S, Effect of sport size on come formation in a XeCl laser ablation of polyethersulfone films. Optics Communications, (2011) 363-367

 

24) H. Pazokian, S. Jelvani, M. Mollavashi, J. Barzin, G. Azizavadi Farahani, ArF laser surface modification of polyethersulfone film: Effect of  laser fluence in improving surface biocompatibility. Applied Surface Science, (2011) 6186-6190

 

25) H. Pazokian, M. Mollavashi, S. Jelvani, , J. Barzin, SH. Abolhoseini, Etching of a polythersulfone film using a XeCl laser. Optical Engineering (2011) 84301-4

 

26) Hedieh Pazokian, Alexandros Selimis, Emmanuel Stratakis, Mahmoud Mollabashi, Jalal Barzin, Saeid Jelvani, KrF laser ablation of  a polyethersulfone film: Effect of pulse duration on structure formation. Applied Surface Science, (2011)

 

 

27) N. Zare, M.Khorasani, K.Hemmesi, H.Mirzadeh, H.Azizi, B.Sadatnia, M.Hatami, S.Kiani, J.Barzin, H. Baharvand, Differentiation of Embryonic Stem Cells into Neural Cells on 3D Poly (D, L-lactic acid) Scaffolds versus 2D Cultures. International Journal of  Artifical Organs, (2011)

 

 

28) M. Esmaeili, S.S. Madaeni, J. Barzin, N. Yousefimehr,  Effect of silver ions coordination on morphology and performance of PES/PVP composite membrane in facilitated transport of ethylene, Separation and Purification Technology (2011) 371 – 383.

 

29) S. Salehi Shahrabi, H.R. Mortaheb, J. Barzin, M.R. Ehsani, Pervaporative performance of a PDMS / blended PES composite membrane for removal of toluene from water, Desalination (2012) 281 – 289.

 

30) Adel Soroush, Jalal Barzin, Mahdi Barikani, Mahdi Fathizadeh, Interfacially polymerized polyamide thin film composite membranes: Preparation characterization and performance evaluation, Desalination (2012) 310 – 316.

 

31) H.Pazokian, J.barzin, M.Mollabashi, S. Jelvani, S. Abolhosseini, Exploring the Influence of a XeCl Laser Treatment on Biocompatibility of Polyethersulfone Film, Laser Physics, (2012) 922 - 929  

 

32) B. Gholizadeh, A. Arefazar, J. Barzin, Morphology and gaz permeability of polymeric membrane by PC / PA6 / Nanoclay ternary nanocomposite, polymers and polymer Composites, (2012), 271 - 278

 

33) Mohannad Massumi, Mozhgan Abasi, Hamideh Babaloo, Panieh Terraf, Mojtaba Safi, Mahdi Saeed, Jalal Barzin, Mojgan Zandi, Masoud Soleimani, The Effect of Topography on Differentiation Fates of Matrigel – Coated Mouse Embryonic Stem Cells Cultured on PLGA Nanofibrous Scaffolds, Tissue Engineering, (2012), Part A Volume 18, Numbers 5 and 6, 2012, 609 -  620

 

34) A. Ghaee, M. Shariaty-Niassar, J. Barzin, A. Zarghan, Adsorption of copper and nickel ions on macroporous chitosan membrane: Equilibrium study, Applied Surface Science Volume 258, Issue 19, 15 July 2012, Pages 7732–7743

35) H.Pazokian, M.Mollabashi, A.Selimis,E.Stratakis, J.barzin and S. Jelvani’ Effect of puls duration on KrF laser treatment of a polyether sulfone film: cell culture study Applied Physics A, (2012) impress 

 

D. Conference Papers:

 

1)Jalal Barzin., S.S. Madaeni and H.Mirzadeh., Effect of Polyvinylpyrrolidone (PVP) on Hemodialysis Performance of Flat membranes Prepared from Polyether Sulfone (PES).                                    7th Iranian Chemical Engineering Congress (IChEC 2002), October 27-29, Tehran University, Tehran, Iran (Ranked Excellent).

 

2) Jalal Barzin., C. Feng, K.C. Khulbe, T. Matsuura, S.S. Madaeni and H.Mirzadeh, Characterization of polyethersulfone hemodialysis membrane by ultrafiltration and atomic force microscopy.

5th International Membrane science and Technology Conference (IMSTEC ‘03)  November 10-14, 2003  Sydney, Australia.

 

3) Jalal Barzin., S. S. Madaeni and H.Mirzadeh, Effect of Preparation Conditions on Morphology and Performance of Hemodialysis Membranes Prepared from Polyether Sulfone (PES) and Polyvinylpyrrolidone (PVP)

Euromembrane ‘04, September 27- October 1, 2004 Hamburg, Germany.

 

4) jalal Barzin., S.S. Madaeni.and H.Mirzadeh., Effect of Polyvinylpyrrolidone (PVP)  on Support layer  Morphology of Flat membranes Prepared from Polyether Sulfone (PES), 9th Iranian Chemical Engineering Congress (IChEC 2004),.23 November 2004,

Tehran, Iran

 

5) Madaeni S.S., Rahimpour A. and Barzin J, Effect of acetone on morphology and performance of  polysulfone ultrafiltration membranes for milk concentration, 9th Iranian Chemical Engineering Congress (IChEC 2004), November 23-25, Tehran, Iran

 

6) Jalal Barzin., S.S. Madaeni.and H.Mirzadeh., “Effect of Polyvinylpyrrolidone (PVP)  on Support layer  Morphology of Flat membranes Prepared from Polyether Sulfone (PES)”                                    9th Iranian Chemical Engineering Congress (IChEC 2004), November 23-25, Tehran, Iran.

 

7) Madaeni S.S., Rahimpour A. and Barzin J., “Preparartion of Polysulfone Ultrafiltration Membranes for Milk Concentration: Effect of acetone on morphology and performance of  polysulfone ultrafiltration membranes for milk oncentration”. 9th Iranian Chemical Engineering Congress (IChEC 2004), November 23-25, Tehran, Iran.

 

 

8) Jalal Barzin., H.Mirzadeh ., S.S. Madaeni. and T. Matsuura., “Hollow Fiber Hemodialysis Membranes Prepared from Polyethersulfone and Polyvinylpyrrolidone”. Engineering with Membranes, Medical & Biological Application,  (EWM 2005) , May 15-18, Cambogli-Portofino, Italy.

 

9) Jalal Barzin., S.S. Madaeni., H.Mirzadeh., T. Matsuura., C. Feng and K.C. Khulbe, “Heat treated polyethersulfone-polyvinylpyrrolidone hollow fiber membrane for hemodialysis application”.                                               International Congress on Membrane and Membrane Processes 2005 (ICOM 2005) August 21-26, 2005 Seoul, Korea.

 

10) Jalal Barzin., H.Mirzadeh ., S.S. Madaeni. and T. Matsuura., “Hollow fiber Membranes Prepared from Polyether Sulfone and Polyvinylpyrrolidone for Hemodialysis Application”                                                                            5th IBERO American Congress on Membrane Science and Technology (CITEM 2005), July 6-8, 2005, Valencia, Spain.

 

11) Jalal Barzin., S.S. Madaeni, H.Mirzadeh. and T. Matsuura., “Polyether Sulfone / Poly( vinyl pyrrolidone) Hollow Fiber Membranes for Hemodialysis Application”

The 4th International Seminar on Polymer Science and Technology (ISPST2005), September 27-29, 2005, Tehran, Iran.( Ranked between the first 5 excellent papers of more than 400 oral and poster papers).

 

12) S. S. Madaeni, A. Rahimpour and J. Barzin.,”Effect of Formamide on Morphology and Performance of Polysulfone Ultrafiltration Membranes for Milk Concentration.                                                                                             The 4th International Seminar on Polymer Science and Technology (ISPST2005), September 27-29, 2005, Tehran, Iran.

 

13) Jalal Barzin, H.Mirzadeh, S.S. Madaeni and T. Matsuura.,Preparation and Modification of  Polyethersulfone – Polyvinyl pyrrolidone Hollow Fiber Membranes for Hemodialysis”.                                                                               10th Iranian Chemical Engineering Congress (IChEC 2005), November 15-17, Zahedan, Iran.

 

 

14) Jalal Barzin, S.S. Madaeni and S.Poormoghadasi.,Fabrication of Polyvinyl alcohol and Polyether sulfone hemodialysis membranes and comparison of their performance and morphological characteristics”. Advance Membrane Technology, June 11-6, 2006, Cetraro Italy.

 

15) S.S.Madaeni, M.Esmaeili1 and Jalal Barzin., “Manufacturing polyamide composite membranes via interfacial polymerization for air separation at low pressures”.,11th Iranian Chemical Engineering Congress (IChEC 2006), November 28-30, Tehran, Iran.

 

16) Jalal Barzin, B.Sadatnia and H.Mirzadeh., "Correlation between theoretical phase diagram and membrane morphology for water/solvent/polyethersulfone systems.The 8th International Seminar on Polymer Science and Technology, (ISPST2007),Oct 23-25, Sharif University, Tehran, Iran  .

 

17) J.Barzin , S. S Madaeni, M. Esmaeili1, Preparation of PES composite membrane using some glassy polymers active layer for air separation, The 8th International Seminar on Polymer Science and Technology (ISPST2007), Oct 23-25, Sharif University, Tehran, Iran  .

                                                          

18) S.S.Madaeni, M.Esmaeili1 and Jalal  Barzin . " Applying some kinds of glassy polymers as active layer of composite membranes for air separation.                                                                                                    The 4th International Seminar on Polymer Science and Technology (ISPST2007), Oct 23-25,  Sharif University, Tehran, Iran.

 

19) Jalal Barzin., H.Mirzadeh , S.S. Madaeni and T. Matsuura, Modification of Hemodialysis Hollow Fiber Membrane Prepared from PolyetherSulfone and Polyvinyl Pyrrolidone,                                                           6th International Membrane science and Technology Conference (IMSTEC ‘07)  November 5-9, 2007  Sydney, Australia.

 

20) A.Abarghooee., Jalal Barzin., A.Jamshidi and T.Khorasani ," Surface Modification of PES Hemodialysis Membrane for Reduction of Protein Fouling and Platelet Adhesion by Plasma , 14th Iranian conference on biomedical engineering(ICBME2008), Feb 13-14, Shahed University, Tehran, Iran.

 

 

21) M.Esmaeili1., S.S.Madaeni,m and Jalal Barzin., “Effects of glassy polymers as active layer of polyethersulphone membranes for optimisation of air separation process at low pressures”.13th Iranian Chemical Engineering Congress (IChEC 2008), October 2-23, Tabriz, Iran.

 

22) B.H. Gholizadeh, , A.Arefazar and Jalal. Barzin, "Morphology and gas permeability of polymeric membrane by PC/ PA6/ ternary nanocomposite" 7th international conference on ,embrane science and technology (MST 2009), May 13-15, Kuala lumpur , Malaysia.

 

23) A.Ghaee., M.Shariaty- Niasar, and Jalal  Barzin., "The effect of chitosan membrane preparation parameters on removal of copper ions" 7th international conference on ,embrane science and technology (MST 2009), May 13-15, Kuala lumpur , Malaysia.

 

24) B.Sadatnia and Jalal Barzin, Thermodynamic evaluation of quaternary membrane-forming system of water/NMP/PES/PV. The 9th International Seminar on Polymer Science and Technology (ISPST2009),

 

25)M.Esmaeili1., Jalal Barzin and S.S.Madaeni,., Evaluation the structural changes of PVP composite membranes as a function of salt addition for facilitated transport process. The 9th International Seminar on Polymer Science and Technology (ISPST2009), Oct 17-21, Tehran, Iran

 

26) H.Pazppkian, Jalal Barzin, M.Mollabashi, S.Jelvani and Z.Zamanipour. ArF Laser Treatment of Polyethersulfone Films. The 9th International Seminar on Polymer Science and Technology (ISPST2009),Oct 17-21, Tehran, Iran

 

27) A.Ghaee., M.Shariaty-Niasar and Jalal Barzin. Chitosan membrane performance, prepared by immersion-precipitation method. The 9th International Seminar on Polymer Science and Technology (ISPST2009), Oct 17-21, Tehran, Iran

 

28) A.Abarghooee, Jalal Barzin., A.Jamshidi and T. Khorasani Biocompatibility study of CO2 plasma treated PES membranes. The 9th International Seminar on Polymer Science and Technology (ISPST2009), Oct 17-21, Tehran, Iran

 

 

29) A. Soroush, Jalal Barzin, and  M. Barikani, Investigation the structural variation of interfacially polymerized thin film composite membranes, The 9th International Seminar on Polymer Science and Technology (ISPST2009), Oct 17-21, Tehran, Iran

 

30) H.Farokhzad,A.Poorkhalil,Jalal.Barzin, A.Mashak,and H.Mobedi, The study of GPC conditions on molecular weight determination of poly(lactide-co-glycolide) 9th International Seminar on Polymer Science and Technology (ISPST2009), Oct 17-21, Tehran, Iran

 

31) Jalal Barzin, S.S.Madaeni and S. Poormoghadasi, Effect of polyethylene glycol on morphology and performance of  Polyvinyl Alcohol hemodialysis Membranes , Euromembrane ‘09,6-10 September , Montpellier, France.

 

32) Esmaeili M. , Barzin J. , Madaeni S.S., Morphological Analysis of PVP Composite Membranes for Facilitated Transport Process, 6 th Internatinal Chemical Engineering Congress & Exhibition, (IChEC 2009), Nov 16-20, Kish Island, Iran.

 

33) A.Ghaee., M.Shariaty- Niasar, and Jalal  Barzin., "The influence of  membrane preparation  parameters on chitosan membrane morphology"  6th International Chemical Engineering Congress (IChEC 2009), Nov 16-20, Kish Island, Iran.

34) M.Esmaeili, S.S.Madaeni, J.Barzin, N.Yousefimehr, Preparation and investigation of defect free PES/PVP composite membranes for ethylene recover process, 1389

 

 

35) Soosan Mokhtari, shaghayegh Baghapoorm Parviz Parvin, Ahmad Amkadi, Jalal Barzin, The effect of incoherent ultraviolet light on the renal capsule tissue using danamic mechanical analysis and FTIR sperctroscopy,

 

 

 36) M..Esmaeili., S.S.Madaeni, Jalal Barzin and N.Yousefimehr “Evaluation of morphology and performance pf PES/PVP composite membrane for ethylene recovery process..2th national convention on Fule, Energy and Environment (2010), May,19-20, Kermanshah, Iran.

 

37) Terraf, Panieh, Safi, Mojtaba, Barzin, Jalal, Masumi, Mohammad, "Do matrigel – embedded transgenic mouse embryonic Es cells cultured on electro spun PLGA – PCL scaffolds Efficiently differentiate to dopaminergic neurons?" 9th Annual Meeting International Society for Stern Cell Research (2011), June 15-18, Metro Toronto Convention Center. Toronto, Ontario Canada.

 

38) Massuni, Mohammad, Tarraf, Pania, Babaloo, Hamideh, Safi, Mojtaba, Abasi, Mozhgan, Divsalar, Adele, Saeed, Mehdi, Barzin, Jalal, "Combined influences of matrigel and electrospun PLGA nanofibrous scaffolds on differentiation of plutipotent mouse embryonic stem cells." 9th Annual Meeting International Society for Stern Cell Research (2011), June 15-18, Metro Toronto Convention Center. Toronto, Ontario Canada.

 

39) F. Alipour, J. Barzin, S. Moradi, "Effect of coagulation bath temperature on morphology and performance of PES – Aerosil nano particle ultra filtration membranes." Asia/Australia Regional Meeting (PPS 2011), Kish Island, Iran. P–6-54  

 

40) F. Alipour, J. Barzin, S. Moradi, "Effect of Delay time on morphology and performance of PES ultrafiltration membrane prepared by PES/SiO2/DMAC" Asia/Australia Regional Meeting (PPS 2011), Kish Island, Iran. P–6-55

 

41) Babaloo, Hamideh, Abasi, Mozhgan, Riazi, Ghoamhossein, Barzin, Jalal, Massumi, Mohammad, "Can beta – boswellic acid synergize derivation of dopaminergic neuron from mouse embryonic Es cells cultured on matrigel coated electro spun PLAGA/PLC nano fibrous scaffold." 9th Annual Meeting International Society for Stern Cell Research (2011), June 15-18, Metro Toronto Convention Center. Toronto, Ontario Canada.

 

42) Ali Haghighat Mesbahi, Elham Khakrah, Saied Nouri Khorasani, Jalal Barzin, Hamid Mobedi, "Investigating Expert system parameters on modeling performance of release behavior form an injectable in situ forming Drug Delivery system" Asia/Australia Regional Meeting (PPS 2011), November 15-17, Kish Island, Iran.

43) M.H. Ghanian.,M.Zandi.,Jalal Barzin.,M.Ehsani.,M.Kazemi-Ashtiani and H.Baharvand "Reducing Diameter and Variability of Electrospun Poly (?- Caprolactone)Nanofibers Using Charged Additives " 14th Iranian National Chemical Engineering Congress (IChEC 2012), Oct 16-18, Tehran, Iran.

 

44)M.Jafarinasab.,JalaBarzin.,H.Mobedi.,H.Mortaheb.,GH.SalehiJouzani.,S.Abbasalizadeh "Effect of Surface Roughness on the Pervaporative Performance of PDMS/PES Composite Membranes for Ethanol/Water Separation " 14th Iranian National Chemical Engineering Congress (IChEC 2012), Oct 16-18, Tehran, Iran.

 

45) P. Jafari, M. Keshavarz Moraveji, Jalal Barzin, Gh. Salehi Jouzani, S. Abbasalizadeh

" Simulation of the Composite Pervaporation Membrane Performance in the Separation of Ethanol from Water by Computational Fluid Dynamics (CFD)" 14th Iranian National Chemical Engineering Congress (ICHEC 2012), Oct 16-18  Tehran, Iran.

 

 46) P. Jafari, M. Keshavarz Moraveji, Jalal Barzin, Gh. Salehi Jouzani, .Abbasalizadeh,

" Application of Response Surface Method (RSM) in the Optimization of the Composite Pervaporation Membrane Performance in the Separation of Ethanol

From Water” 14th Iranian National Chemical Engineering Congress (ICHEC 2012), Oct 16-18  Tehran, Iran.

 

47) M.H.Ghanian., Jalal Barzin.,M.Zandi.,M.Ehsani.,M.Kazemi-Ashtiani and H.Baharvand "Fabrication of Uniform Electrospun Poly (?-caprolactone) Microfibers Using Cationic Surfactant" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran

 

48) M.Kazemi-Ashtiani., M.Zandi .,Jalal Barzin., M.H.Ghanian and H.Baharvand  "Surface Functionalization and Characterization of Electrospun Polycaprolactone Nanofibers for Biomedical Application" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran

 

49) M.Jafari-Nodoushan., H.Mobedi and Jalal Barzin  "Monitoring the Effect of Flow rate on Size and Morphology of Microspheres Produced by the Means of Electrospraying Method" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran

 

50) M.Jafari-Nodoushan., T.Ebrahimi., Jalal Barzin and H.Mobed i  "Evaluation of Naltroxone Release Kinetic from In Situ-Forming Drug Delivery System (Investigation the Effect of Polymer End Group Functionality)" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran

 

51) M.Jafari-Nodoushan., T.Ebrahimi., H.Mobedi and Jalal Barzin  "Effect of Polymer Blending on Morphology and Initial Burt Release of an in Situ-Forming Drug Delivery System" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran     

 

52) S.Taghavi., F.Mohammadi and Jalal Barzin  "Ionic Polymer-metal composites (IPMC ) from a recycled Flemion membrane" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran    

 

53) M.Jafari-Nodoushan., Jalal Barzin., H.Mobedi. H.Mortaheb., GH.SalehiJouzani and S.Abbasalizadeh  "Effect of PDMS viscosity on the Pervaporative Performance of PDMS/PES composite membranes for ethanol/water separation" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran    

 

54) M.S.Amini-Fazl.,H.Mobedi and Jalal Barzin "Controlled Release of Paclitaxel From In situ-Forming PLGA Gel" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran

 

55) P.Jafari., Jalal Barzin., Gh.Salehi Jouzani., M.Keshavarz Moraveji and S.Abbasalizadeh    "Optimization of PDMS/blended PES Composite Membrane Performance by Response Surface Methodology" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran

 

56) P.Jafari., M.Keshavarz Moraveji., Gh.Salehi Jouzani.,Jalal Barzin and S.Abbasalizadeh    "Pervaporative Separation of Ethanol/Water Mixture Using PDMS/blended PES Composite Membrane: CFD Simulation" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran

 

E. Patents

 

1) Jalal Barzin, S.S. Madaeni and H.Mirzadeh.(2005)

Design and Preparation of lab-scale Polyether Sulfone Flat sheet Membranes for Hemodialysis process. Iran Patent, No 32720 

 

2) Jalal Barzin, S.S. Madaeni and H.Mirzadeh.(2005)

Design and Preparation of lab-scale Polyether Sulfone Hollow fiber Membranes for Hemodialysis process. Iran Patent, No 32721

 

3) S.S.Madaeni, M.Esmaili and J.Barzin. (2007)

Manufacturing and evaluating the asymmetric and composite polyamide membranes based polyethersulphone for air separation at low pressures, Iran Patent, No 38688 

4) S.S.Madaeni, M.Esmaili and J.Barzin.(2007)

Manufacturing of composite membranes based polyethersulphone via immersion coating procedure for air separation at low pressures. Iran Patent, No 38689 

 

5)  J. Barzin, H.Mirzadeh, and S.S. Madaeni (2007)

Introduce and identification of flat sheet membrane defects and removing methods Iran Patent, No 38745.

 

6) J. Barzin, H.Mirzadeh, and S.S. Madaeni (2007)

A novel method for reduction of platelet adhesion on hemodialysis membranes for high performance application. Iran Patent, No 38746.

 

7) J. Barzin, H.Mirzadeh, and S.S. Madaeni (2007)

Preparation and Modification of Polyether Sulfone Hollow fiber Hemodialysis Membranes for high performance. Iran Patent, No 38747.

 

8) J. Barzin, H.Mahdavi, and M. Kermani (2008)

Design and manufacture of automatic machine for hollow fiber collection. Iran Patent, No 52655

 

9) J. Barzin, H.Mahdavi, and M. Kermani (2008)

Design and manufacture of spinneret die for hollow fiber production. Iran Patent, No 52656

 

10) J. Barzin, H.Mahdavi, and M. Kermani (2008).

Design and manufacture of sorting machine for hollow fiber production. Iran Patent, No 52657

11) M.Naeimi seresht, A. Karkhaneh and J.Barzin (2010)

Preparation of PDMS membrane for NaCl difiusion

 

12) H.Farokhzad, H.Mobedi, J.Barzin and A. Poorkhalil (2010)

Preparaton of dental in situe nanocomposite drag delivery system ( In vitro study) Iran Patent, No 65351

 

 

F. Books

 

1) J.Barzin and M. Esmaeili  “ Membrane cleaning and renew methods “  ( in Persian), IPPI,2010

 

2) Sustainable Membrane Technology for Energy, Water, and Environment, (Edited by Ahmad Fauzi Ismail and Takeshi Matsuura) Wiley, 2012 , Chapter 12   

 

 

G. Ms.c & PhD students

 

32 Ph.D & Ms.c students (Current or Graduated) in membrane and polymer area

 

 

 

Last Update: 2012/11/20