Farsi | Site Map | IPPI Mail   
      A

 Plastic Research Department

  General Information:

Major Objectives:

Polymer Processing and Simulation
Polymer Compounding and Modification
Polymer Blends and Alloys
Material, Process, Part, and Machine Design
Current Activities:

Peroxide and Silane Cross-linking of PE for Production of Pipes and Cables
Insulation Compounds for Communication and High Voltage Cables
Polymer Recycling
Metal Injection Molding
PP/Clay Nano-composites
Polymeric–modified Bitumens
Mechanical, Thermal, Rheological, and Electrical Properties of Polymers
Modeling and Computer Simulation
Polymeric Sensors
Polymeric Films
Heat Shrinkable Polymers

People in the Department:

Morshedian, Jalil
(Ph.D.), (Head of Department)
Mehrabzadeh, Mahmood (Ph.D.)

Oromiehie, Abdulrasoul
(Ph.D.)

Yousefi,Ali Akbar
, (Ph.D.)

Razavi Nouri, Mohammad
(Ph.D.)
Ghasemi, Ismail (Ph.D.)

Khonakdar, Hossein Ali
(Ph.D.)

Azizi, Hamed
(M.Sc.)

Eslami, Hassan
(M.Sc.)
Ahmadi, Shervin (M.Sc.)

Current Research Projects:

A Study of PVDF and PVDC chain Dimensions in Solution and Melt State
Preparation of Synthetic Wood by Using Recycle Papers and Plastics
Preparation of EXPE Compounds for Shielding of Medium-to-High Voltage Power Cables
Rheological Study of Short Glass Fiber Reinforced Nylon–EPDM
Preparation of Fire–Retardant Polystyrene Foam
‍Preparation of Polymeric–Modified Bitumens
Preparation of Semi–Conductive Polyethylene
Investigation of Formulation and Preparation of Sheet Dialysis Membrane in Lab scale
Preparation and Study of Processing and Physical Structure of Polymeric Sensors
Study of The Effect of Functionalizing and Clarifying agents on the Optical Properties of PP Films
An Investigation of Shape Memory Effect on Heat Shrinkability of Polyethylene and Its Mechanical Modeling
Metal Powder Injection Modeling Via Natural Water-Based Binder
Investigation of Blending Composition and Processing Conditions Effects on Mechanical and Optical Properties of Blown Films of LLDPE/LDPE Blends
Preparation of Intelligent Polymers Based on Radiation Cross-linked Polyethylene and Modeling of Their Behavior
Design and Manufacturing of pilot Plant for Recycling of Plastic Wastes (PE, PP, PVC) Containing Paper and Modification of Mechanical Properties

Completed Research Projects:

Preparation of PS/PP Blends
Manufacturing of PP/PE Blends Due to Improving of PP Properties
Rubber Toughening of PP
Substitution of Timber Board by Polymers for Molding of Cements
Preparation of Heat Shrinkable Polymers from PE
Toughened Plastics for Bumper Formulations
Pyrolytic Optimization of Novolac Phenolic Resins
Characterization and Preparation of Dental Impression Materials(Alginates)
Investigation of Electroplating of Plastics and Improvement of Adhesion Between Plastic and Metal Layers
Study of the Role of Particle and Particle Size Distribution of Inorganic Fillers on Mechanical Properties and Morphology of PP
Peroxide Cross-linking of PE and Investigation of its Physical and Mechanical Properties
Study of Kinetics of Cure of Phenolic Resins
Preparation of Modified Nylons and Studying its Coating and Adhesion on to Metalic and Non-Metalic Bases
Development of the LDPE/EVA/ Flame Retardant Blends Formulation for Optimal Quality as Cable Insulates
Modification of EPDM with Maleic Anhydride
An Investigation of Carbon Black Master Batches
Formulation and Processing of Brake Material
Reinforcement of Polyamide With Short Glass Fibers
Toughening of Plastic Bags made of Waste Materials
Preparation of PP/NR Blends and its Mechanical Properties
Studying the Effects of Mixing and Rheological Parameters on Structure and Properties of Solid Reinforced Polymers
Mixing and Heat Transfer of Time Independent Fluids in Agitated Vessels
Radiation Stabilization of Polypropylene
Recycling and Production of Radiological Films
Effect of Oregano-Titanium Coupling Agents on the Processing and Properties of Highly Filled Plastics; Part one: Thermoplastics
Study of Environmental Effects on Properties of PE Pipes
Processing and Characterization of Blends and Alloys of Nylon-6 with EPDM
Fabrication of Polymer / Ceramic Composites
Rigid-Rigid Blending of Polycarbonate and Poly (ethylene terephtalate)
Making Use of Polymeric Fibres in Place of Asbestos in Concrete
Preparation of Polyamides Thermoplastic Elastomers
Characterization of PE Gas Pipes
Criteria Consideration for Selection of Plastic Material for Syrume Industry
Characterization and Preparation Feasibility Study of Dental Modeling Waxes
Twin Screw Manufacturing : Design and Optimization
Effect of Gamma Irradiation on Structure and Properties of Polypropylene
Synthesis of Polymers with Different Functional Groups and Investigation their Properties
Kinetic Studies of Maleic Anhydride with HDPE and Synthesis of High Strength PE
Grafting of PE with Silane in a Single Screw Extruder and Studying the Effect of Formulation of Machine Variables on Process
Design and Development of a General Purpose and Modular Shear Head Extruder and Studying the Effects of Machine Geometrical Variants on the Dynamic Cure of Polymeric Systems
Investigation of Formulation and Process Parameters of Heat Shrinkable Polyethylene Extrudable Products
Preparation of Electrical Insulators
Preparation of Impact Resistant PE for Production of Medical Vessels
Improvement of the Transparency and Domestic Commercial Polypropylene Grades
Impact Modification of Polyacetals by Polyurethane Thermoplastic Elastomers
Study of Maintenance Properties of Packaged Drink Water in Polyethylene (PE)
Preparation of Cross-Linked Polyethylene by Silane (XLPE)
Experimental Modeling of Mechanical Properties of PC/ABS Blends based on the DOE (Design of Experiment)
Manufacture of Polypropylene by Controlled MFI
Preparation of Transparent Polypropylene
Preparation of Barrier Films for Food Packaging
Rheology of PE- Metallic Powder Composites and Making Parts from them
An Investigation on Dispersion, Flow and Molding of Metal Powder in Polymeric Binders
Surface modification of PE electron beam grafting
Preparation of Fire Resistant Polystyrene
Characterization and Production Technology Establishment of Automotive Plastic Parts
Recycling of Poly(Ethylene Terephthalate) from Post Consumer Soft-Drink Bottles
Modification of Polypropylene (PP) with Poly(ethyleneterephthalate) (PET) Preparing Fiber
Studies Thermal Property and Application Plastisol PVC Based on Epoxidation of Seed Oil
Study on Compatibility and Mechanical Properties of PVC and NBR Blends
Dynamic Vulcanization of Thermoplastic Elastomers From Polyolefins (PP , PE) with Natural Rubber
Recycling Plastics Waste (PP, PE, PVC) Containing Paper
Effect of Correlation Between Mixing Parameters and Rheological Behavior on Structure and Engineering Properties of Glass-Reinforced Plastics:(GRP)
PEt Deverage Bottle Recycling
Design of Curing Extruder and Continues Dynamic Curing of Elastomer and Plastics
Toughening of Epoxy Resin
Preparation of Heat Shrinkable Materials and Building of an Expansion Apparatus
Fracture and Toughness of Melamine Molding Compounds
Studies of Properties and Morphology of PVC/ABS/NBR Blends
Silane Grafting and Cross-linking of PE by Reaction Extrusion
Recycling of Plastics Waste:1- Recycling of PET and Improving Its Properties
Production of Polyol from Butadiene
EPDM/EPR Toughening of PP
Electron-beam Cross-linking of PE Compounds Used for Cable, Pipe and Heat Shrinkable Products

Facilities:

Twin Screw Extruder (ZSK25)
· Side Feeder
· Gravimetric Feeders
· Liquid Feeder
· Vibration Feeder
· Vacuum Pump
Twin Screw Extruder (Collin)
· o-rotating screw
· Counter rotating screw
Single Screw Extruder (Manook)
HAKKE sys 90
· Internal Mixer 90 cc with Element
· Internal Mixer 90 cc with Oil
· Internal Mixer 300 cc with Element
· Single Screw Extruder
· Banbury, Sigma and Camblade Rollers
· Film Blowing Accessories
Injection Molding Machine
· Laboratory Machine Capacity 70 gr., Vertical
· Injection Molding Capacity 125 gr., Horizontal
Grinder
Hot Press
Creep Apparatus
Autoclave
Turbo Mixer
Laboratory Mixing Extruder
Mini Press
Shear Head
Granulator
Expansion Frame

 

 

Log In

 

Setting ...

 
 
 

 The IPJ is a publication of the IPPI scientific achievements It is well received in international academic circles The submission of articles from worldwide sources is a promising sign that the IPJ, within its short life, has gained international recognition. Please visit IPJ site at  http://journal.ippi.ac.ir

 
 

You can find many resources of polymer science in central library of IPPI. There is an Information Services for search in other resources...

 
 

The Polymer Technology Incubator, a non-profit organization, assigned to promote the efficient management, exchange of information and experience, and resource sharing of incubator centers in the fields of polymer, biopolymer, chemical engineering and pharmacology.

 
  Copyright 1999-2004 - Iran Polymer and Petrochemical Institute